Warming of walls, ceiling and floor with expanded clay

Ceramzit is lightweight, porous building materials in the form of gravel, which combines environmental purity, durability, inexpensive cost and excellent heat -insulating characteristics. Due to its last advantage, this product is successfully used as a warming component of ceilings, roofs, attic premises, floors, etc. Compared to brick and natural wood, the specified building material is more effective in relation to structures insulation. For example, it is necessary to say that a layer of expanded clay, the thickness of which is 100 mm, is equivalent to a 100 cm brick and a 300-mm blackboard in terms of heat-insulating properties.

Ceiling insulation

In order for insulation of the ceiling structure to become truly effective and high-quality, this process is best done at the stage of building a building. Otherwise, the isolation device and the coating crosser will cause serious time. In order to carry out the coating crossing, the presence of appropriate knowledge and skills in the installation of the ceiling is necessary.

Roof insulation

In conditions of increasing thermal insulation of the roof of the premises, expanded expanded clay, worthy of competition, is not able to compose any material. The most important and fundamental plus of the named cellular material is that it minimizes the probability of condensate, t. e. wet spots. Keramzit is an indispensable component in the insulation of the roof, which for a long period of time does not lose its capabilities and physical properties.

Insulation of the attic

The attic roof is the main zone in the room through which a large amount of heat is lost, t. To. It is through it that warm air, rising up, leaves the limits of the house. To avoid this, it is recommended to insulate the attic using building materials presented in the article. It is also advisable to provide thermal insulation of the attic premises at the beginning of the building of the building – this will exclude the possibility of blowing the roof.

Insulation of the fundamental base

In order to reduce heat transfer, on the inside of the floor, approximately fifty centimeters from the fundamental base, it is necessary to make formwork. The cavity that is formed between the foundation and the design is filled with expanded clay. To build the formwork, it is allowed to use a slate or a second -grade board. However, at the same time, you can also apply some other strong and reliable material that can withstand the expanded clay layer.

The best material for wall insulation is – expanded clay. Tree layer masonry is used to warm the walls of expanded clay. The first layer is usually used by expanded clay concrete blocks. For the second layer, a mixture of cement milk and expanded clay is used. The third layer protects against external exposure, you can use facing brick, wood or panel.